2004 Bombardier Outlander 330/400 Factory Service Manual, Page 394Get this manual
Section 05 ELECTRICAL Subsection 06 (INSTRUMENTS AND ACCESSORIES)
Installation
Insert switch in place and secure it with its nutPlug wires as per following:
WIRE REDVIOLET REDBROWN REDBLACK (coming from battery) BLACKRED (coming from flasher module) REDYELLOW GREYBLACK WHITEBLACK BLACK PIN NUMBER 49 15 and 30b 30 49a 58 31
Removal
Horn is located on upper left corner of radiatorTo remove it, unplug wires and unscrew nut securing horn to front support3 1
2WD4WD SELECTOR
On models covered by this shop manual, 2WD mode is inactive because disconnect unit connector is unplugged from the actuator1 2
V07G0ZA
1Horn 2Wires 3Front Support
Installation