2004 Bombardier Outlander 330/400 Factory Service Manual, Page 391Get this manual
Section 05 ELECTRICAL Subsection 06 (INSTRUMENTS AND ACCESSORIES)
V01G1UA
V01G1WA
TYPICAL
TYPICAL
Push bulb in and hold while turning counterclockwise to releaseInstall the new bulb by first pushing in while turning clockwiseInstall the socket into the headlamp housingAlign holes in the housing with the socket slots
Install the protective rubber sleeve and connect the headlamp connectorNOTE: Take care do not pry the socket terminalsAdjust beam aiming as follows: Turn knobs to adjust beam height and side orientation to your convenienceAdjust both headlamps evenlyV07G0KA V01G1VA