2004 Bombardier Outlander 330/400 Factory Service Manual, Page 284Get this manual
Section 07 STEERING Subsection 02 (STEERING SYSTEM)
Rear Handlebar Cover Remove: front handlebar cover screws no7
HANDLEBAR
Removal
Remove: handlebar covers no5 and no6 handlebar grips no1 brake handle (see below in this section) throttle handle and multi-function switch (see below in this section) NOTE: Remove handlebar grips, throttle handle and multi-function switch only if the handlebar is defective and replace with new steering clamp mounting bolts no8 and steering clamp no9 handlebar no10
V07L09A
Inspection
Inspect the handlebar for damage, cracks or bending, replace if any of these problems is detected
TYPICAL 1Rear cover screws
Unplug the speedometer
Installation
For the installation, reverse the removal procedure