2004 Bombardier Outlander 330/400 Factory Service Manual, Page 246Get this manual
Section 05 ELECTRICAL Subsection 06 (INSTRUMENTS AND ACCESSORIES)
No voltage: Check wiring condition Voltage is good: Check accessories
12-VOLT POWER OUTLET
NOTE: No key requiredRemove the consoleUnplug the power outlet connectorsUsing multimeter, measure the voltage between REDBLACK and BLACK wiresThe obtained value should be between 12 and 14.5 Vdc No voltage: Check accessories fuse (15 A) and wiring condition Voltage is good: Change power outlet
V07A2HA
1Bolts to be removed
Remove winch
Installation
For the installation, reverse the removal procedure
WINCH CONTROL SWITCH
XT Models Only