2004 Bombardier Outlander 330/400 Factory Service Manual, Page 210Get this manual
Section 04 FUEL SYSTEM Subsection 03 (CARBURETOR)
Refer to following photos for proper float level gauge positioning and to TECHNICAL DATA for proper level
Installation
To install carburetor on engine, inverse removal procedurePay attention to the following details: Inspect throttle and choke cable housing prior to installation Reinstall throttle and choke cables, at the same time adjust the throttle cable, then install the side coverRefer to CARBURETOR ADJUSTMENTS below in this section Reinstall carburetor on vehicleWhen reinstalling carburetor on vehicle, pay attention to the following: CAUTION: The rubber flanges must be checked for cracks andor damageAt assembly, the rubber flanges must be perfectly matched with the air box, carburetor and engine or severe engine damage will occurDo not use screwdriver or other tool to install the rubber flangesMake sure rubber flange recess is aligned with intake adaptor notch