2004 Bombardier Outlander 330/400 Factory Service Manual, Page 190Get this manual
Section 03 ENGINE Subsection 12 (CVT)
Roller Check each roller no19 for roundness of external diameterNOTE: Replace governor cup if the roller does not move freelyMeasure the roller diameterIf roller is out of specification, replace governor cupROLLER DIAMETER MINIMUM (new) MAXIMUM (new) SERVICE LIMIT 13.70 mm (.539 in) 13.90 mm (.547 in) 13.20 mm (.519 in)
R400motr170A
1Contact surface to the roller
Centrifugal Lever Pivot Bolt Measure diameter of centrifugal lever pivot bolt no13, replace if it is out of specificationA
WARNING
Whenever replacing centrifugal levers, always replace all levers at the same timeOtherwise, the drive pulley will be unbalanced (because of lever differences)Slider Shoe Check slider shoes no11 for visible wear and replace if damagedNOTE: If necessary, use screwdriver to remove slider shoes