2004 Bombardier Outlander 330/400 Factory Service Manual, Page 189Get this manual
Section 03 ENGINE Subsection 12 (CVT)
Pull one-way clutch no15 slowly until the half of spring sleeves no16 is visible
WARNING
This procedure must be performed in wellventilated areaCAUTION: To avoid damage, make sure cleaner does not contact the crankshaft sealRemove all hardened oil deposits that have baked on crankshaft and pulley tapered surfaces with coarse or medium steel wool andor sand paper no600CAUTION: Do not use any other type of abrasiveReclean mounting surfaces with paper towel and cleaning solventWipe off the mounting surfaces with clean, dry paper towelCAUTION: Mounting surfaces must be free of any oil, cleaner or towel residue
R400motr166A
One-way clutch Fixed half Spring sleeve area Direction of removal
Hold both spring sleeves with fingers and release them when one-way clutch is out of engagement1 2