2004 Bombardier Outlander 330/400 Factory Service Manual, Page 160Get this manual
Section 03 ENGINE Subsection 10 (CRANKSHAFTBALANCER SHAFT)
CONNECTING ROD BIG END DIAMETER SERVICE LIMIT 40.100 mm (1.579 in)
CRANKSHAFT MAGPTO DIAMETER MINIMUM (new) MAXIMUM (new) SERVICE LIMIT 42.024 mm (1.6545 in) 42.040 mm (1.6551 in) 42.000 mm (1.6535 in)
CONNECTING ROD BIG END CLEARANCE SERVICE LIMIT 0.09 mm (.0035 in)
Crankshaft Radial Play MAGPTO Side Measure crankshaft on MAGPTO sideCompare to inside diameter of MAGPTO bushing (refer to GEARBOX)2 1
CRANKSHAFT MAG RADIAL CLEARANCE SERVICE LIMIT 0.07 mm (.0028 in)
Installation
For installation, reverse the removal procedurePay attention to following detailsUse NEW bushings no8, when connecting rod big end diameter is out of specificationPut bushings correctly in place and clean the split surface on both sides (cracked area) carefully1