2004 Bombardier Outlander 330/400 Factory Service Manual, Page 113Get this manual
Section 03 ENGINE Subsection 07 (MAGNETO SYSTEM)
Installation
With Magneto Housing Cover Removed Using the oil seal installer (PN 529 035 759) and the inserting jig handle (PN 420 877 650), install the oil seal in its locationNOTE: Never use oil in the press fit area of oil sealCAUTION: Use the oil seal protector (PN 529 035 935) to avoid damaging the oil seal during installation
Removal
Remove: magneto housing cover no6 screws nos8 and stator no11
R400motr10A
1Oil seal 2Oil seal installer (PN 529 035 759) 3Handle for insertion jig (PN 420 877 650)
Reinstall other removed parts in the reverse orderCAUTION: Always use the oil seal protector (PN 529 035 935) to avoid damaging the oil seal during magneto housing cover installationWithout Magneto Housing Cover Removed Using suitable tube, with the proper diameter, install the oil seal as per following illustration