2004 Bombardier Outlander 330/400 Factory Service Manual, Page 95Get this manual
Section 03 ENGINE Subsection 05 (COOLING SYSTEM)
DRAINING THE SYSTEM
WARNING
Never drain or refill cooling system when engine is hotTo drain cooling system, partially unscrew cooling drain plug no1 on the engine MAG side and remove radiator cap no11
System Capacity
Refer to TECHNICAL DATA
Coolant Replacement Procedure WARNING
To avoid potential burns, do not remove the radiator cap or loosen the engine drain plug if the engine is hotDrain the system completelyPinch radiator inlet hose no14 between radiator and thermostat housing with large hose pincher (PN 529 032 500)R400motr231A
1Cooling drain plug
CAUTION: If the drain plug is removed completely, pay attention to the gasket ring no2Never use the gasket ring second timeAlways install new oneWhen cooling system is drained completely, screw the cooling drain plug and torque it to 10 Nm (89 lbfin)
V07C0AA