2004 Bombardier DS650/DS650 Baja/DS650 Baja X Shop Manual, Page 186Get this manual
Section 07 STEERING SYSTEM Subsection 02 (STEERING SYSTEM)
The maximum length for tie-rod groove to ball joint end must be the value in the following chart:
A 20 2532 .197
STEERING COLUMN BEARING
Removal
Place vehicle on jack stands and remove front wheelsRemove steering columnRemove bolts no29 and first bearing flange no30Remove bearing no31
V01I0YA
B 311 12-14 .039
MODEL DS mm in
Installation
For installation, reverse the removal procedurePay attention to the following detailPlace flanged collar toward outside
Before installing tie-rods, ensure that both heads of tie-rod ends are alignedIf the heads are not aligned, the tie-rod end play and its durability will be greatly reducedInstall new cotter pinBoth ends of cotter pin must be foldedPerform the toe-out adjustment