2004 Bombardier DS650/DS650 Baja/DS650 Baja X Shop Manual, Page 112Get this manual
Section 03 ENGINE Subsection 09 (CRANKSHAFTBALANCER SHAFT)
Using micrometer, measure piston at 16 mm (58 in) perpendicularly (90) to piston pin axis
With the micrometer set to the dimension, adjust cylinder bore gauge to the micrometer dimension and set the indicator to (zero)
V01C3KA
F00B09A
TYPICAL 1Measuring perpendicularly (90) to piston pin axis A16 mm (58 in)
The measured dimension should be as described in the previous tableIf not, replace pistonPISTON MEASUREMENT SERVICE LIMIT 99.94 mm (3.9346 in)
1Use the micrometer to set the cylinder bore gauge 2Dial bore gauge
PistonCylinder Clearance