2003 Bombardier Rally 200 Service Manual, Page 265Get this manual
Section 10 BODYFRAME Subsection 02 (BODY)
GENERAL
For installation, use the torque values and Loctite products from exploded viewsClean threads before using Loctite product when installing screwsPlastic Rivet Plastic rivets no17 are used in the riveting of the various body partsPlastic rivets can be removed carefully by pliers (PN 295 000 070)NOTE: Reuse the plastic rivets
V06L09A
1Seat 2Screw holes
Installation
Insert seat on frameInstall screws below the seatWhen seat rests in its position, install the CVT air outlet hoseInstall right side cover no11 and left side cover no10V06L08A