2003 Bombardier Rally 200 Service Manual, Page 231Get this manual
Section 06 DRIVE TRAIN Subsection 02 (REAR AXLE)
Using open wrench (PN 529 035 866) and crow foot (PN 529 035 884) torque each nut to 140 Nm (103 lbfft)Install the rear wheel hubsSee the procedure above
CHAIN TENSIONER
Removal
Remove the rear axleSlide out the chain tensioner from the left side of the swing armNOTE: To pull out the chain tensionerthe protrusion should be aligned with the swing arm grooveV06H0FA
1Chain tensioner 2Swing arm 3Pry bar
Inspection
Look at the chain tensioner for damageThe bore must be free of scratches in order to receive new bearings and seals2
Installation