2003 Bombardier Rally 200 Service Manual, Page 179Get this manual
Section 03 ENGINE Subsection 11 (CVT)
Mount clutch holding tool (PN 529 035 864)CAUTION: Both hooks on spring loaded levers have to be engaged on outside diameter of driven pulley fixed half2 2
R175motr55A R175motr53A
Withdraw levers to install tool Handle grip Clutch holding tool Clutch support
1Nut AWearing diameter
NUT OUTSIDE DIAMETER NEW MINIMUM NEW MAXIMUM SERVICE LIMIT 16.980 mm (.6685 in) 16.991 mm (.6689 in) 16.880 mm (.6646 in)
Disassemble nut, disengage the hooks of the levers on clutch holding tool and slowly release tool
WARNING
Centrifugal clutch is spring loaded
Cleaning of Driven Pulley