2003 Bombardier Rally 200 Service Manual, Page 174Get this manual
Section 03 ENGINE Subsection 11 (CVT)
Inspection
Check CVT cover for cracks or other damagesReplace if necessaryCheck if the gasket is brittle, hard or otherwise damagedReplace if necessaryCheck if the CVT cover bearing must turn smoothly and freelyOtherwise, replace itSee CVT Cover Bearing below)
DRIVE PULLEY
Installation
Place the gasket in the CVT cover grooveInstall the CVT coverAlign the end of driven pulley nut no15 with the ball bearing no4NOTE: Do not overdo the CVT cover to install itInstall the center top screw of cover in firstInstall the other screws then torque them in crisscross sequenceInstall hoses then torque clamps
R175motr34A
Drive belt Drive pulley Driven pulley Crankshaft locking bolt (PN 529 035 617)
CVT COVER BEARING
Inspection