2003 Bombardier Rally 200 Service Manual, Page 168Get this manual
Section 03 ENGINE Subsection 10 (GEARBOX)
NOTE: Check axial measurement of intermediate shaft including thrust washer no18 and no28If out of measurement check for wrong andor missing thrust washers MAGPTO1 2
AXIAL MEASUREMENT NEW MINIMUM NEW MAXIMUM 82.00 mm (.269 ft) 82.20 mm (.270 ft)
R175tran14A
PTO side (crankcase) MAG side (gearbox cover) Thrust washer thickness (PTO side) Thrust washer thickness (MAG side)
Check all bearings, bearing points, tooth flanks, taper grooves and annular groovesAnnular grooves must have sharp edgesCheck for condition of shift shaft plate in the front area as per following illustrationReplace in case of excessive wear1 2
R175tran14B