2003 Bombardier Rally 200 Service Manual, Page 124Get this manual
Section 03 ENGINE Subsection 08 (CYLINDER AND HEAD)
Installation
For installation, reverse the removal procedureNOTE: Install the valve cover screws in criss-cross sequence1 1
VALVE ADJUSTMENT
Lock crankshaft at the TDC compression position (refer to CRANKSHAFT)Remove valve cover (refer to VALVE COVER above)Hold adjusting screw no14 and loosen locking nut no13Using feeler gauge, check the valve clearanceR175motr63A
1Valve cover screws 2Oil pressure switch
valve cover no2 and profile sealing ring no3
R175motr78A