2003 Bombardier Rally 200 Service Manual, Page 97Get this manual
Section 03 ENGINE Subsection 05 (COOLING SYSTEM)
NOTE: Using pliers, pull the water pump housing out of crankcaseSee the following illustration3 1
Inspect water pump gear for wear and damage on the snap mechanism to the needle pinReplace if necessary
Installation
The installation is the opposite of the removal procedurePush oil seals no1 in place by using the handle for insertion jig (PN 420 877 650) and the oil seal pusher (PN 529 035 849) as per following procedure: Install inner oil seal no1 by using spacer on the oil seal pusherThe sealing lip has to point towards water pump gear.R175motr172A