2003 Bombardier Rally 200 Service Manual, Page 54Get this manual
Section 02 MAINTENANCE Subsection 04 (STORAGEPRESEASON PREPARATION)
The inlet hose is located under console in front of fuel tankOpen the console cover then remove the cup
VEHICLE CLEANING AND PROTECTION
Wash and dry the vehicleRemove any dirt or rustTo clean the plastic parts, use only flannel clothes or Kimtowels wipers no58-380 from Kimberly-ClarkCAUTION: It is necessary to use flannel cloths or Kimtowels wipers on plastic parts to avoid damaging further surfaces to cleanTo clean the entire vehicle, including metallic parts with thick coat of grease, use Endust imported by Bristol Myers, available at hardware stores or supermarketsCAUTION: Do not use Bombardier Cleaner on decals, plastic parts or vinylTo clean the entire vehicle, including metallic parts with thin coat of grease, use Simple Green from Sunshine Makers Inc available at hardware stores or at automotive parts retailerFor vinyl and plastic parts, use VinylPlastic Cleaner (PN 413 711 200 (6 l))CAUTION: Never clean plastic parts with strong detergent, degreasing agent, paint thinner, acetone, products containing chlorine, etcInspect the vehicle and repair any damageTouch up all metal spots where paint has been scratched offSpray all metal parts with BOMBARDIER LUBE (PN 293 600 016)NOTE: Protect the vehicle with cover to prevent dust accumulation during storageCAUTION: The vehicle has to be stored in cool and dry place and covered with an opaque tarpaulinThis will prevent sun rays and grime from affecting plastic components and vehicle finish