2003 Bombardier Outlander 400 Factory Service Manual, Page 188Get this manual
Section 03 ENGINE Subsection 12 (CVT)
BUSHING BORE DIAMETER NEW MAXIMUM NEW MAXIMUM SERVICE LIMIT 30.000 mm (1.181 in) 30.020 mm (1.182 in) 30.200 mm (1.189 in)
Cam Check cam no30 for visible damage and wear limit with caliper
Fixed Half Check ball bearing for free play and smooth operationReplace if necessaryCheck shaft for heavy wear or visible damageReplace if necessaryIf the shaft is removed, measure bushing diameter with dial bore gaugeMeasuring point must be at least mm (14 in) from bushing edgeThis bushing is not replaceableReplace fixed half if bushing no29 is out of specificationVisually inspect coatingsBUSHING BORE DIAMETER NEW MAXIMUM NEW MAXIMUM SERVICE LIMIT 30.000 mm (1.181 in) 30.020 mm (1.182 in) 30.200 mm (1.189 in)