2003 Bombardier Outlander 400 Factory Service Manual, Page 183Get this manual
Section 03 ENGINE Subsection 12 (CVT)
Replace centrifugal lever no14 with screws no13 and lock nuts no12 if the contact surfaces show heavy visible wear
Sliding Half Check sliding half for cracks and sliding contact surface for excessive wearReplace sliding half if necessaryMeasure centrifugal lever pivot bolt boresReplace sliding half if bores are out of specification or damaged
R400motr170A
1Contact surface to the roller
WARNING
Whenever replacing centrifugal levers, always replace all levers at the same timeOtherwise, the drive pulley will be unbalanced (because of lever differences)Slider Shoe Check slider shoes no11 for visible wear and replace if damagedNOTE: If necessary, use screwdriver to remove slider shoesR400motr172A