2003 Bombardier Outlander 400 Factory Service Manual, Page 148Get this manual
Section 03 ENGINE Subsection 10 (CRANKSHAFTBALANCER SHAFT)
PLAIN BEARING INSIDE DIAMETER (MAGPTO) SERVICE LIMIT 42.070 mm (1.6563 in)
NOTE: Use crankcase support MAG (PN 529 035 916) and crankcase support PTO (PN 529 035 754) when removing or pushing plain bearing in place2 1
Check oil seal no11 if brittle, hard or otherwise damagedReplace if necessaryNOTE: The oil seal is removed easily with flat screwdriver
Plain Bearing Removal Procedure
CAUTION: Always support crankcase housings properly when ball bearings, needle bearings or plain bearings are removedCrankcase housing damages may occur if this procedure is not performed correctlyNOTE: Always use press for removal or installation of plain bearing halvesRemove plain bearings no9 and no10 with the plain bearing removerinstaller (PN 529 035 917)R400motr43A