2003 Bombardier Outlander 400 Factory Service Manual, Page 130Get this manual
Section 03 ENGINE Subsection 09 (CYLINDER AND HEAD)
CAMSHAFT BORE MAG SIDE MEASURED IN DIAMETER NEW MINIMUM NEW MAXIMUM SERVICE LIMIT 35.000 mm (1.3780 in) 35.025 mm (1.3789 in) 35.040 mm (1.3795 in)
Compress valve spring no33; use valve spring compressor clamp (PN 529 035 724) and valve spring compressor cup (PN 529 035 725)
WARNING
Always wear safety glasses when disassembling valve springsBe careful when unlocking valvesComponents could fly away because of the strong spring preload1 2
CAMSHAFT BORE PTO SIDE MEASURED IN DIAMETER NEW MINIMUM NEW MAXIMUM SERVICE LIMIT 22.000 mm (.8661 in) 22.021 mm (.8670 in) 22.040 mm (.8677in)
Replace parts that are not within specifications
Installation
For installation, reverse the removal procedurePay attention to the following detailsInstall camshaft in the opposite way of the removal then place the camshaft retaining plate in the slot2 3