2003 Bombardier Outlander 400 Factory Service Manual, Page 124Get this manual
Section 03 ENGINE Subsection 09 (CYLINDER AND HEAD)
Installation
For installation, reverse the removal procedurePay attention to the following detailsClean mating surface and threads of camshaft prior to assemble camshaft timing gear
CAUTION: Crankshaft and camshaft must be locked on TDC position to place camshaft timing gear and timing chain in the proper positionDouble-check position of timing gear with camshaft locking tool (PN 529 035 926)
R400motr62A
1Camshaft locking tool 2Camshaft screw 3Camshaft timing gear
R400motr63A
1Mating surface on camshaft 2Threads for camshaft screw
Camshaft timing gear must be at TDC position before installing the timing chainInstall camshaft timing gear so that the timing gear tabs are located into the flat zone of the camshaftThe printed marks on the camshaft timing gear have to be parallel to the cylinder head baseSee the following illustration for proper positioning1 3