2003 Bombardier Outlander 400 Factory Service Manual, Page 105Get this manual
Section 03 ENGINE Subsection 07 (MAGNETO SYSTEM)
CAUTION: Apply Loctite 5910 all around the crankcase MAG slit surface except the areas described below
R400motr06A
1Mating surface on the magneto housing cover 2No need to apply Loctite 5910
R400motr08A
CAUTION: Ensure the sealing ring is present on the crankcase mag sideUse oil seal protector (PN 529 035 935) to avoid damaging the oil seal during reinstallation of the magneto housing cover
1Screws M6 45 2Screws M6 45 with sealing ring 3Screws M8 65
Tightening sequence for screws on magneto housing cover is as per following illustration7 13 11
15 17 18 2