2003 Bombardier Outlander 400 Factory Service Manual, Page 81Get this manual
Section 03 ENGINE Subsection 04 (REMOVAL AND INSTALLATION)
Use punch to remove the other bushing
Exhaust Pipe Inspection
Check exhaust pipe for cracks, bending or other damagesReplace if necessary
Exhaust Pipe Installation
Install new gasket no20 on exhaust pipe end (cylinder head side)With muffler no19 secured in its rubber mounts no21, secure exhaust pipe on cylinder head with exhaust nuts no9V07C1GA
Anti-Vibration System Installation
Apply synthetic grease on anti-vibration bushings and insert them in engine support, one on each side
EXHAUST SYSTEM
WARNING
Never touch exhaust system components immediately after the engine has been run because these components are very hot2
V07C1IA
Exhaust Pipe Removal