2003 Bombardier Outlander 400 Factory Service Manual, Page 39Get this manual
Section 02 MAINTENANCE Subsection 03 (MAINTENANCE PROCEDURES)
MAINTENANCE PROCEDURES
SPECIAL PROCEDURES
Flipped Over
When vehicle has flipped over or stays tilted on the side, wait about minutes before starting the engineCheck oil level and adjust if necessaryDo not start the engine if the oil level is lower than the minimum recommendedIf oil pressure light stays ON after starting the engine, stop engine and check oil levelIf oil level is good, refer to LOW OR NO OIL PRESSURE in TROUBLESHOOTING sectionCallout
Remove the CVT cover drain plug to drain the CVT housingRemove the CVT cover then clean and check all parts of CVTRefer to CVT section