2003 Bombardier Outlander 400 Factory Service Manual, Page 8Get this manual
INTRODUCTION
TYPICAL PAGE
Section 03 ENGINE Subsection 06 (MAGNETO SYSTEM)
Title indicates main procedure to be carried-out
BEARING
Inspection
Ball bearing no10 must rotate freelyOthewise, replace it
STATOR AND TRIGGER COIL
Removal
Removemagneto housing cover no7 screw no11 and 12 stator with trigger coil no134 4
Removal
Heat up the magneto housing cover to about 100 (212 F) for an easy ball bearing removalm
Bold face number following part name refers to exploded view at beginning of subsection
R610motr12A
Call-outs for above illustration
1Ball bearing