2002 Traxter Autoshift XL/XT Shop Manual, Page 305Get this manual
INTRODUCTION
Threadlocker
Uncovered Holes (bolts and nuts)
1Clean threads (bolt and hole) with solvent2Apply Loctite Primer (PN 293 800 041) on threads (bolt and nut) and allow to dry for 30 seconds3Choose proper strength Loctite threadlocker4Apply several drops along the threaded hole and at the bottom of the hole5Apply several drops on bolt threads6Tighten as requiredStud in Blind Holes
A00A3LA
1Apply here 2Do not apply
1Clean threads (bolt and nut) with solvent2Apply Loctite Primer (PN 293 800 041) on threads and allow to dry3Choose proper strength Loctite threadlocker4Fit bolt in the hole5Apply few drops of threadlocker at proposed tightened nut engagement area6Position nut and tighten as requiredBlind Holes