2002 Traxter Autoshift XL/XT Shop Manual, Page 223Get this manual
Section 08 SUSPENSION Subsection 02 (FRONT SUSPENSION)
Remove cotter pin and castellated nut from upper ball joint no4
Attach upper A-arm to knuckleInstall castellated nut and torque to 45 Nm (33 lbfft)NOTE: Make sure the conic sections are clean (without grease or oil)Install new cotter pinBoth ends of cotter pin must be foldedTorque upper A-arm to 63 Nm (46 lbfft)Secure brake hose to upper A-armInstall wheel(s)NOTE: Do not interchange left and right tiresThe tires are directional and their rotation must be kept in specific direction for proper operation
V01J0DA
TYPICAL 1Remove cotter pin 2Castellated nut 3Upper ball joint
Use suitable ball joint remover and detach upper A-arm from knuckleRemove bolts no7 retaining upper A-arm to frame
V01J0KA
DIRECTION OF ROTATION
Torque wheel nuts to 75 Nm (55 lbfft) in crisscross sequence