2002 Traxter Autoshift XL/XT Shop Manual, Page 209Get this manual
Section 06 DRIVE TRAIN Subsection 03 (REAR AXLE)
SHIM THICKNESSSHIM NOTCH(ES) THICKNESS 0.25 mm (.010 in) 0.38 mm (.015 in) 0.51 mm (.020 in) 0.56 mm (.022 in) NOTCHES 4
Measure the other half housing between housing edge and the inner ring of bearingThis is measure "E"
Example: The measure "A"64.700 mm (2.5472 in)The measure "B" (given)64.450 mm (2.5374 in)A-B=C The result "C" is 0.250 mm (.0098 in)In accordance with the previous table, find the result "C" and choose the proper shims: 0.25 mm (.010 in) 0.38 mm (.015 in) 0.51 mm (.020 in)The total thickness of shim pack is 1.65 mm (.0649 in)Install pinion, shims, bearing and pinion nutApply Loctite 243 to nut and torque to 98 Nm (72 lbfft)After pinion installation, center ring gearTake the half housing with pinion gearMeasure distance between housing edge and the inner ring of bearingThis is measure "D"