2002 Traxter Autoshift XL/XT Shop Manual, Page 198Get this manual
Section 06 DRIVE TRAIN Subsection 02 (FRONT DRIVE)
Take the same distance to the other endThis is measure "K"
V01H1PA
Add measure "J" from measure "K"Subtract this result from measure "H"Note this result "L"The result "L" is the length of ring gear carrier between bearingsH(JK)Subtract result "L" from "G"At this measure subtract the clearance 0.127 mm (.005 in)The result is the shim thicknessG=0.127 mm (.005 in)shim thickness CAUTION: Do not use the previous table to select shimsThe previous table must be used to choose the pinion gear shims onlyDetermine the appropriate shimSHIM THICKNESSSHIM NOTCH(ES) THICKNESS 0.25 mm (.010 in) 0.38 mm (.015 in) 0.51 mm (.020 in) 0.64 mm (.025 in) 0.56 mm (.022 in) NOTCHES 4