2002 Traxter Autoshift XL/XT Shop Manual, Page 95Get this manual
Section 03 ENGINE Subsection 09 (CYLINDER AND HEAD)
V01C1JA
1Measure at three points
V01C1IA
CYLINDER TAPER mm (in) NEW MAXIMUM SERVICE LIMIT 0.035 mm (.001 in) 0.090 mm (.004 in)
1Circlip 2Valve stem seal
Inspection
Inspection of valve stem seals is not needed as new seals should always be installed whenever cylinder head is diassembled
Installation
For installation, reverse the removal procedure