2002 Traxter Autoshift XL/XT Shop Manual, Page 86Get this manual
Section 03 ENGINE Subsection 08 (LUBRICATION SYSTEM)
GENERAL
At installation, use torque values and Loctite products from the exploded viewClean threads before using Loctite products when installing screws
OIL CHANGE AND OIL FILTER REPLACEMENT
Oil and filter are to be replaced at the same timeOil change should be done with warm engine
ENGINE PRESSURE TEST
NOTE: The engine pressure test should be done with warm engine and with the recommended oil at the proper levelRemove the oil pressure switch under oil filter and install the oil pressure gauge (PN 529 035 709) with the adapter (PN 529 035 652)3 2
WARNING
The engine oil can be very hotWait until engine oil is warmEnsure vehicle is on level surfaceClean the drain plug areaRemove dipstickPlace drain pan under the engine drain plug areaUnscrew drain plugV01C3HA