2002 Traxter Autoshift XL/XT Shop Manual, Page 38Get this manual
Section 02 MAINTENANCE Subsection 03 (MAINTENANCELUBRICATION)
TIRE PRESSURE
AUTOSHIFT MODEL
Wheel Removal
REAR 35 kPa (5 PSI) 31 kPa (4.5 PSI)
FRONT RECOMMENDED 38 kPa (5.5 PSI) 35 kPa (5 PSI)
MINIMUM
XL MODEL
Loosen nuts then lift vehicle where neededPlace support under vehicleRemove nuts then remove wheelAt installation, it is recommended to apply antiseize lubricant on threadsGently tighten nuts in criss-cross sequence then apply final torque of 75 Nm (55 lbfft)
FRONT RECOMMENDED
48 kPa (7 PSI) 45 kPa (6.5 PSI)
48 kPa (7 PSI) 45 kPa (6.5 PSI)
MINIMUM
XT MODEL
FRONT RECOMMENDED