2002 Bombardier Traxter Factory Service Manual, Page 280Get this manual
Section 11 TECHNICAL DATA Subsection 04 (TRAXTER SERIES)
TRAXTER SERIES
VEHICLE MODEL Engine type Starting system Number of cylinder(s) Number of valves Decompressor type Bore Stroke Displacement Compression ratio Maximum HP RPM Lubrication Oil filter Normal oil operating pressure of engine Air filter type Exhaust system Intake valve opening Intake valve closing Exhaust valve opening Exhaust valve closing Valve stem diameter ENGINE Valve spring free length Valve spring squareness Valve seat contact width Piston measurement Pistoncylinder clearance Piston ring type Rectangular Taper-face Oil scraper ring Piston ring end gap Rectangular Taper-face Oil scraper ring All Rectangular Taper-face Oil scraper ring Piston groovering clearance Rectangular Taper-face Oil scraper ring All Ring height Intake Exhaust Intake Exhaust Wear limit Wear limit Wear limit Wear limit New Wear limit mm (in) mm (in) mm (in) mm (in) mm (in) mm (in) mm (in) mm (in) 1st 2nd 3rd mm (in) mm (in) mm (in) mm (in) mm (in) mm (in) mm (in) New maximum Wear limit Wear limit mm (in) mm (in) mm (in) mm (in) 1st mm (in) 2nd mm (in) 3rd Type Spark arrester TRAXTER TRAXTER XT TRAXTER XL BOMBARDIER-ROTAX, 4-strokeLongitudinal mount, liquid cooled, OHVElectric with auxiliary recoil valves with hydraulic lifters (no adjustment) Automatic 89 (3.5) 80 (3.15) 498 (30.4) 9.1:1 6000 Wet sump with replaceable oil filter BOMBARDIER-ROTAX 101 kPa (14.7 PSI) 608 kPa (88 PSI) stage foam filter Nelson, stainless steel USDA approved 21.0 BTDC 43.8 ABDC 49.5 BBDC 15.8 ATDC 6.95 (.274) 6.95 (.274) 39.00 (1.54) 1.1 (.043) 1.8 (.071) (.079) 88.9 (3.5) 0.016 to 0.044 (.001 to .002) 0.090 (.004) Rectangular Taper-face Oil scraper ring 0.15 (.006) 0.15 (.006) 0.15 (.006) 0.35 (.014) 0.4 (.016) 0.35 (.014) 1.5 (.06) 0.030 (.0012) 0.030 (.0012) 0.020 (.0008) 0.062 (.0024) 0.062 (.0024) 0.055 (.0021) 0.015 (.0006) 1.2 (.047) 1.2 (.047) 2.45 (.0967)