2002 Bombardier Traxter Factory Service Manual, Page 263Get this manual
Section 10 BODYFRAME Subsection 02 (BODY)
DECALS HAVING PROTECTIVE FILM ON BOTH SIDES These decals usually contain graphics and are used on plasticINSTALLATION ON PLASTIC Clean surface with isopropyl alcoholUsing pencil and the decal as template, mark the area where decal will be locatedApply an activator (PN 293 530 036) to prepare the surface using clean clothAfter few seconds, when the activator evaporates, the surface is readyCAUTION: Do not use soapy water to locate decal on plastic partsRemove back protective film from decal and carefully align decal with marksWhen well aligned squeegee decal beginning at center and working outward using firm, short, overlapping strokes
acetone strong detergents abrasive cleaners waxes containing an abrasive or cleaning agent in their formula
PLASTIC REPAIR REPAIR
The very first step before repairing plastic materials is to find out exactly which type of material is involvedRefer to following chartCAUTION: Consult the plastic maintenance chart carefully, some maintenance products are not compatible with certain plasticsUNREPAIRABLE PART Fuel tank cover Front and rear facia Front and rear fender Rear fender cover Footrest Steering cover Storage cover Inner fender Front skid plate Front and rear mudguard Rear cargo box and gate