2002 Bombardier Traxter Factory Service Manual, Page 193Get this manual
Section 06 DRIVE TRAIN Subsection 02 (FRONT DRIVE)
Use hub puller (PN 529 035 612) to extract the wheel hub
Inspection
Inspect knuckle for damageIf any damage is detected, change the knuckle
Installation
For installation, reverse the removal procedurePay attention to the following detailsReinstall front wheel(s) and torque nuts to 75 Nm (55 lbfft) in criss-cross sequenceNOTE: Do not interchange left and right tiresCheck direction of rotation mark on tires
WHEEL BEARING
V04H0FA
Inspection
Raise front of vehicleTake tire by the top and the bottomCheck lateral playIf there is any play, change wheel bearingNOTE: Verify the ball joints play in firstPerform all repairs before check the wheel bearing conditionBe careful not to misjudge play in the ball joint
Remove the inner race of bearing from wheel hub taperHeat the inner race and push it out with punch