2002 Bombardier Traxter Factory Service Manual, Page 186Get this manual
Section 06 DRIVE TRAIN Subsection 02 (FRONT DRIVE)
Pinion Gear Removal Remove oil seal no27Unscrew the pinion nut no28Use the differential spanner socket (PN 529 035 649)Remove the bearing no29 at the same time as the pinion gear no30NOTE: The pinion gear and bearing can be easily removed using the following suggested tool: pipe 3-12" diax 5" (1) screwed rod M10 1.25, 7" in length (1) nut M10 1.25 (3) flat bar (1)To install, reverse the removal procedurePay attention to the following detailsCheck O-ring no31 for damageIf so, change itInstall the shim no32 then the ball bearingNOTE: If ring gear carrier, pinion gear, ring gear, housing or bearing is (are) changed, recenter the ring gear carrier in the housing before final assemblySee belowInstall the nut and new oil seal