2002 Bombardier Traxter Factory Service Manual, Page 178Get this manual
Section 05 ELECTRICAL Subsection 07 (INSTRUMENTS AND ACCESSORIES)
Installation
Insert the hourmeter into the bracket and lock with the tabsPlug the REDGREY wire to the positive terminalSee the following illustration to show the correct terminal location
Remove: fairlead front skid plate lower bolts retaining the front bumper upper frame boltsLoose the top bolts that are attached to the rackSwing out the whole bumperRemove the lower winch boltsRemove winch
Installation
For the installation, reverse the removal procedure
WINCH CONTROL SWITCH
XT Model
Refer to TESTS section
Removal
V03G02A
1Positive terminal 2Negative terminal