2002 Bombardier Traxter Factory Service Manual, Page 110Get this manual
Section 04 FUEL SYSTEM Subsection 02 (FUEL CIRCUIT)
Installation
NOTE: To ease grommet insertion, apply BOMBARDIER LUBE (PN 293 600 016 (12 14 oz))Position grommet on fuel line, as shown in the next photo then insert grommet in tank hole
Unplug all hoses from fuel valveRemove valve
Installation
Reinstall fuel valve by positioning the rubber washer on the inside and nut on the outside of bracketSee next photo
1Grommet properly position for tank insertion 2Fitting recess
Once grommet is inserted in tank hole, push fitting until its recess properly sits in grommetRefill tank and ensure there are no leaks