2002 Bombardier Traxter Factory Service Manual, Page 94Get this manual
Section 03 ENGINE Subsection 10 (CRANKSHAFTBALANCER SHAFT)
NOTE: Recentre the crankshaft in the crankcase if the crankshaft or the crankcase are replaced
RECENTRE CRANKSHAFT
NOTE: Only fit spacer on the magneto endPlace crankshaft into rear crankcase housing (magneto side)Do not install spacer on clutch side at this timeUsing depth gauge, measure distance between crank web and housing edgeThis is the dimension "B"
V01C2EA
1Measure here
Connecting Rod Big End Axial Play Using feeler gauge, measure distance between thrust washer and crankshaft counterweightIf the distance exceeds specified tolerance, replace the crankshaftCONNECTING ROD BIG END mm (in) SERVICE LIMIT Axial play Radial play 1.3 (.05) 0.08 (.003)
Connecting RodPiston Pin Clearance Measure piston pinCompare to inside diameter of connecting rodCONNECTING ROD SMALL END DIAMETER SERVICE LIMIT 22.07 mm (.869 in)