2002 Bombardier Traxter Factory Service Manual, Page 80Get this manual
Subsection 08
Section 03 ENGINE (LUBRICATION SYSTEM)
Inspection
Inspect oil pump for marks or other damagesUsing feeler gauge, measure the clearance between oil pump outer rotor and oil pump inner rotor2 1
Installation
For installation, reverse the removal procedureNOTE: When the repair is donePerform an oil pressure test then test drive to confirm all is working well
MAIN OIL PRESSURE REGULATOR
The regulator works when shiftingThe pressure should be between 600 kPa (87 PSI) and 800 kPa (116 PSI)B
Removal
Remove water pump and magneto coverRefer to MAGNETO SYSTEMUnscrew plug no21Remove compression spring no22, valve piston no23 and valve seat sleeve no24V01C1VA