2002 Bombardier Traxter Factory Service Manual, Page 67Get this manual
Section 03 ENGINE Subsection 05 (COOLING SYSTEM)
Removal
Unplug temperature sender connectors
Installation
The installation is the opposite of the removal procedureFor installation, use the torque values indicated in the exploded viewCAUTION: To prevent leaking, make sure that the rubber ring is exactly in its groove when reinstalling the water pump housing
WATER PUMP IMPELLER
Removal
Remove the water pump housingUnscrew the water pump impeller no18Turn clockwise
610motr40A
1Temperature sender connector 2Engine inlet hose
Inspection
Check impeller for cracks or other damageChange the impeller if necessary
Unscrew temperature sender no3
Installation
The installation is the reverse of the removal procedure, paying attention to the following detailCheck O-ring and change if necessaryCAUTION: Don't apply any product on the threads or on the O-ring