2002 Bombardier Quest 650XT Service Manual, Page 364Get this manual
Section 03 ENGINE Subsection 10 (GEARBOX)
Measure shim on MAG side: NOTE: Clean mating surface of crankcase before measurementRefer to crankcase assembly proceduremm (.0787 in) nominal thickness of axial needle bearing no24Distance between butting face and theoretical center of bevel gear taperB is defined by manufacturer and written on surface of bevel gear2 1
Theoretical shim thicknessShim selectes in accordance with DUse following course of calculation to get the theoretical thickness for washer no23
NOTE: Take theoretical value and choose shim (MAG side shim) from the below tableCALCULATED THICKNESS (D) 1.25 mm to 1.29 mm (.0492 to .0508 in) 1.30 mm to 1.34 mm (.0512 to .0528 in) 1.35 mm to 1.39 mm (.0531 to .0547 in) 1.40 mm to 1.44 mm (.0551 to .0567 in) 1.45 mm to 1.49 mm (.0571 to .0587 in) 1.50 mm to 1.54 mm (.0591 to .0606 in) 1.55 mm to 1.59 mm (.0610 to .0626 in) SHIM NUMBER (E) 125 130 135 140 145 150 155 160 165 170