2002 Bombardier Quest 650XT Service Manual, Page 257Get this manual
Section 08 SUSPENSION Subsection 03 (REAR SUSPENSION)
GENERAL
At installation, use torque values and Loctite products from the exploded viewClean threads before using Loctite products when installing screws1 2
REAR SHOCK
Removal
Lift rear of vehicle until rear shock absorbers no1 are fully extendedInstall jack stands or blocks under the frame to support the vehicleRemove upper no4 and lower no5 bolts and nuts no6 retaining shock absorbers each side3
A01B4LA
TYPICAL 1Clevis pin 2Bar 3Handle horizontal
At installation, cap opening no8 must be 180 from spring stopper opening no72