2002 Bombardier Quest 650XT Service Manual, Page 238Get this manual
Section 06 DRIVE TRAIN Subsection 03 (REAR AXLE)
Verify condition of half housing seal no24Change seal if necessaryCheck all bearings and all oil sealsChange them if necessaryPinion Gear Removal Unscrew bolt retaining the inserting tube to differentialRemove oil seal no25Unscrew the pinion nut no26Use the differential spanner socket (PN 529 035 649)Remove the bearing no27 at the same time as the pinion gear no28NOTE: The pinion gear and bearing can be easily removed using the following suggested tool: pipe 3-12" diax 5" (1) screwed rod M10 1.25, 7" in length (1) nut M10 1.25 (3) flat bar (1)To install, reverse the removal procedurePaying attention to the following detailsCheck O-ring no29 for damageIf so, change itInstall the shim no30 then the ball bearingNOTE: If pinion gear, ring gear, housing or bearing is (are) changed, recenter the ring gear in the housing before final assemblySee belowInstall the nut and new oil seal
V01H17A
TYPICAL