2002 Bombardier Quest 650XT Service Manual, Page 225Get this manual
Section 06 DRIVE TRAIN Subsection 02 (FRONT DRIVE)
V04H06A
V04H08A
Subtract measure "B" from measure "A"Note this result "C"A-B=C Remove ring gear carrier then install pinion gear into housingMeasure distance between mounting surface and the pinion shim surfaceThis is measure "D"
Subtract measure "E" from measure "D"Note this result "F"D-E=F The difference between result "F" and result "C" is the pinion shims thicknessF= Pinion shims thicknessDetermine the appropriate pinion shim using the following pinion gear shims kit (PN 703 500 049)THICKNESS 0.25 mm (.010 in) 0.38 mm (.015 in) 0.51 mm (.020 in) 0.56 mm (.022 in) NOTCHES 4