2002 Bombardier Quest 650XT Service Manual, Page 213Get this manual
Section 05 ELECTRICAL Subsection 06 (INSTRUMENTS AND ACCESSORIES)
Removal
NOTE: Use the same procedure for RH or LH headlightUnplug the headlight connectorRemove both screws under facia
Adjustment
Adjust beam aiming as follows: Turn knobs to adjust beam height and side orientation as explained belowAdjust both headlights evenly
V04G0EA
V04G0GA
1Screws under facia
Remove both knobsRemove the last screw retaining headlight holder
1Beam height adjustment 2Beam side adjustment
HEADLIGHT BEAM AIMING
Select high intensityBeam aiming is correct when center of high beam is 131 mm (5 in) below the headlight horizontal center line, scribed on test surface, (17 ft) awayNOTE: Sit down the driver or place the same weight on the vehicleMeasure headlight center distance from groundScribe line at this height on test surface (wall or screen)Light beam center should be 131 mm (5 in) below scribed line